LIM Contactor busbar kit

Description

This busbar kit (two busbars) is designed to be used together with the TE contactors intended to be used with the LIM. Using one pair of busbars per contactor is recommended, so order two kits to receive four busbars.

The busbar has a hole to install a bolt to easily attach the Voltage Sense Board wire on the appropriate side.

Due to tolerances during fabrication, the alignment of the surfaces on the contactor and standoff might not be 100% accurate. You might need to tweak / bend the busbar slightly to ensure the contacts are aligned and making contact without any tension before tightening them.

Standoff height = 30 mm (standoff not included).