iBooster GEN2 connector kit
€99,00 (inc. VAT €119,79)
Full connector set with crimp pins, seals and blind stops to integrate a Tesla GEN2 iBooster brake booster in your wiring loom.
In stock (can be backordered)
Description
Integrate an iBooster from a Tesla Model 3 in your wiring loom perfectly by building on these new connectors, crimp pins and seals. Details in the blogpost ‘Wiring the Tesla iBooster‘. Includes the main ECU connector as well as the pedal travel sensor connector.
The kit includes:
- Original Bosch ECU connector + lock/cover
- Crimp pins for ECU for power and pedal travel (2x big and 5x small) not for CAN connections
- Wire seals for the above mentioned crimp pins
- Blind plugs for the non-used entries (including those originally for CAN)
- Pedal travel sensor connector
- Crimp pins for pedal travel sensor
- Seals for pedal travel sensor
Optionally you can buy 5 additional small crimp terminal to be used for the CAN-BUS connections and/or as a spare.
The iBooster connector kit fits the following iBoosters:
- Tesla model 3 LHD, part 1044671-00-D and 1044671-00-E (I’ve not seen 1044671-00-A, 1044671-00-B, 1044671-00-C but these should fit too if they exist)
- Tesla model 3 RHD, part 1044672-00-D (I’ve not seen 1044672-00-A, 1044672-00-B, 1044672-00-C or 1044672-00-E but these should fit too if they exist)
Additional information
| Weight | 0,1 kg |
|---|---|
| Dimensions | 15 × 8 × 4 cm |
| Brand |
Be the first to review “iBooster GEN2 connector kit”
Reviews
There are no reviews yet.