Vent valve for battery box
€19,50 (inc. VAT €23,60)
To balance pressure and if needed quickly release pressure.
Only 1 left in stock (can be backordered)
Description
The valve itself is waterproof, in other words it has an IP67 rating and at the same time it allows airflow. It serves two functions:
- It allows exchange of air in response to pressure changes for example due to height differences so the battery enclosure can breathe.
- In case of sudden pressure increase in a battery box (for example due to thermal runaway / fire) it will rapidly release pressure.
A vent valve / pressure relief valve / blow off valve should be used when building a sealed battery box.
They need to be installed on the outside of the battery box on a vertical surface.
Approximately 65 x 65 mm
Airflow 8,8 L/min @ dP 10 kPa
Burst pressure 20 – 40 kPa
Additional information
| Weight | 0,5 kg |
|---|---|
| Dimensions | 10 × 8 × 4 cm |
Be the first to review “Vent valve for battery box”
Reviews
There are no reviews yet.